Lenovo ThinkPad T431s Hardware Maintenance Manual - Page 42
Error messages, Beep symptoms
View all Lenovo ThinkPad T431s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Table 2. Numeric error codes (continued) Symptom or error 2102 Detection error on HDD2 (Mini SATA) 2110 Read error on HDD0 (Main HDD) 2111 Read error on HDD1 (Ultrabay HDD) 2112 Read error on HDD2 (Mini SATA) 2200 Machine Type and Serial Number are invalid. 2201 Machine UUID is invalid FRU or action, in sequence 1. Reseat the Mini SATA device. 2. Replace the mini SATA device. 3. Replace the system board. 1. Reseat the hard disk drive. 2. Replace the main hard disk drive. 3. Replace the system board. 1. Reseat the hard disk drive. 2. Replace the Ultrabay hard disk drive. 3. Replace the system board. 1. Reseat the Mini SATA device. 2. Replace the mini SATA device. 3. Replace the system board. Replace the system board. Replace the system board. Error messages Table 3. Error messages Symptom or error Fan error. Thermal sensing error. The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue. This system does not support batteries that are not genuine Lenovo made or authorized. The system will continue to boot, but may not charge unauthorized batteries. Press the ESC key to continue. Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use. FRU or action, in sequence 1. Replace the fan. 2. Apply thermal grease. 3. Replace the system board. Replace the system board. Replace the battery. Replace the battery. Beep symptoms Table 4. Beep symptoms Symptom or error Four cycles of four short beeps One short beep, pause, three short beeps, pause, three more short beeps, pause, and one short beep Three short beeps, pause, one short beep, pause, one more short beep, pause, and three short beeps FRU or action, in sequence Replace the system board. 1. Replace the memory module. 2. Replace the system board. Remove the device from ExpressCard slot. 36 Hardware Maintenance Manual