Lenovo ThinkPad i Series 1800 English - User's Guide for A Series - Page 41
LCD problems
View all Lenovo ThinkPad i Series 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Hardware troubleshooting Problem The Fn+F12 key combination does not make the computer enter hibernation mode. Cause and action Enable hibernation mode as follows: For Windows 98: 1. Start the ThinkPad Configuration Program 2. Click Power Management. 3. Click the Hibernation tab. 4. Click the Enable hibernation... button. 5. Click the Create Now button. The computer cannot enter hibernation mode if you are using one of the IBM communication PC Cards. To enter hibernation mode, stop the communication program, and then remove the PC Card or disable the PC Card slot, using the Control Panel. For Windows NT: Note: You must format your hard disk with the FAT format system to use hibernation mode in Windows NT. If you format your hard disk with NTFS, the default format in Windows NT, you cannot use hibernation mode. 1. Start the ThinkPad Configuration Program. 2. Click Power Management. 3. Click Suspend/Resume Options. 4. Click Enable Hibernation. 5. Click OK. The computer cannot enter hibernation mode when you are using one of the IBM communication PC Cards. To enter hibernation mode, stop the communication program, and then remove the PC Card or disable the PC Card slot, using the Control Panel. LCD problems Problem The screen is blank. Cause and action Press Fn+Home to make the screen brighter. If you still have the problem, do the "Cause and action" for the next problem in this list. Chapter 3. Solving computer problems 25