LevelOne FCS-5051 Manual - Page 43

Media Type, Camera IP, User Name, Password, Video, PTZ, Preset, Web Configurator

Get LevelOne FCS-5051 PDF manuals and user guides View all LevelOne FCS-5051 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

OneSecure Video Management Software Amdinstrator Manual V3.0.09 If the device you wish to add supports ONVIF, you can select "ONVIF" for Media Type, and the settings page will appear as below. Please fill in the five marked fields shown below that are required to communicate with the device - Media Type, Camera IP, HTTP Port, User Name, and Password, and then click "Apply". 4. By applying the settings, the NVR server will get the video stream, and the camera will have been successfully added to the NVR system. You may click Video, PTZ, or Preset Tour (available for camera with pan/tilt/zoom capabilities) tabs to configure other properties. 5. To directly access the device configurator webpage, simply click "Web Configurator" on top left to open it. Certain advanced settings are only available through the web configurator and not through NVR. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
OneSecure Video Management Software Amdinstrator Manual V3.0.09
43
If the device you wish to add supports ONVIF, you can select
“ONVIF”
for
Media Type
,
and the settings page will appear as below. Please fill in the
five
marked fields shown
below that are required to communicate with the device -
Media Type
,
Camera IP
,
HTTP
Port
,
User Name
, and
Password
, and then click “
Apply”.
4.
By applying the settings, the NVR server will get the video stream, and the camera will
have been successfully added to the NVR system. You may click
Video, PTZ,
or
Preset
Tour
(available for camera with pan/tilt/zoom capabilities) tabs to configure other
properties.
5.
To directly access the device configurator webpage,
simply click “
Web Configurator
” on
top left to open it. Certain advanced settings are only available through the web
configurator and not through NVR.