LevelOne FCS-5051 Manual - Page 54

Apply, Close, Get Motion Settings, Motion, Setup, Motion Enable, Get Device Settings

Get LevelOne FCS-5051 PDF manuals and user guides View all LevelOne FCS-5051 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

OneSecure Video Management Software Amdinstrator Manual V3.0.09 4. When the setting is finished, click "Apply" to save, then "Close" to exit this page. To check or modify the regions you set, please go through clicking "Get Motion Settings", Motion Setup" and then "Motion Enable" buttons, the saved regions are already selected on the list, select one to proceed. Adjustment Attributes Field Name Description Sensitivity(1-100) Timer(0-300 secs) Threshold (%) Determines how sensitive the camera reacts to the movement. The higher the sensitivity level is, the smaller motion will trigger the alarm, but may give false alarms. Default is 70. The interval before the next motion detection can be triggered again. Default is 1 second. The threshold level of this motion detection region. The lower threshold level is, smaller portion of the region would be considered as motions, which is more easily to be triggered, but may give more false alarms. Note 1. If you have changed the motion detection settings via the web configurator, please remember to come back to NVR and press "Get Device Settings", then "Apply" to save to NVR. This is to ensure that the settings in NVR are always in sync with the device. 2. If a motion region is set, once a movement is detected in this region, in live view: (1) the red region frame will blink, and (2) a new alert entry will be generated in the event list. 3. PIR detection is available only for models with this function. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
OneSecure Video Management Software Amdinstrator Manual V3.0.09
54
4.
When the setting is finished, click “
Apply
” to save, then “
Close
” to exit this page. To check
or modify the regions you set, please go through
clicking “
Get Motion Settings
”,
Motion
Setup
” and then “
Motion Enable
” buttons, the saved regions are already selected on the
list, select one to proceed.
Adjustment Attributes
Field Name
Description
Sensitivity(1-100)
Determines how sensitive the camera reacts to the movement. The higher
the sensitivity level is, the smaller motion will trigger the alarm, but may give
false alarms. Default is 70.
Timer(0-300 secs)
The interval before the next motion detection can be triggered again. Default
is 1 second.
Threshold (%)
The threshold level of this motion detection region. The lower threshold level
is, smaller portion of the region would be considered as motions, which is
more easily to be triggered, but may give more false alarms.
Note
1.
If you have changed the motion detection settings via the web configurator, please remember
to come back to NVR and press
“
Get Device Settings
”
, then
“
Apply
”
to save to NVR. This is
to ensure that the settings in NVR are always in sync with the device.
2.
If a motion region is set, once a movement is detected in this region, in live view:
(1)
the red region frame will blink, and (2) a new alert entry will be generated in the event list.
3.
PIR detection is available only for models with this function.