LevelOne FCS-5061 Manual - Page 11
Connect Ethernet Cable, 2.3 Connect Alarm I/O, unlit, please check LAN connection.
View all LevelOne FCS-5061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2.2 Connect Ethernet Cable Use of Category 5 Ethernet cable is recommended for network connection; to have best transmission quality, cable length shall not exceed 100 meters. Connect one end of the Ethernet cable to the RJ-45 connector of the Camera, and the other end of the cable to the network switch or PC. NOTE: In some cases, you may need use an Ethernet crossover cable when connecting the IP Camera directly to the PC. Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please check LAN connection. Green Link Light indicates good network connection. Orange Activity Light flashes for network activity indication. 2.3 Connect Alarm I/O The camera equips one alarm input and one relay output for alarm application. Please refer to the label on the alarm terminal block and connect the alarm wiring accordingly. 11