LevelOne FCS-5061 Manual - Page 47
FTP, server's IP address through a dynamic port. Alternatively, uncheck the box
View all LevelOne FCS-5061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6.3.6 FTP The FTP setting can be found under this path: System> FTP. The Administrator can set as sending alarm message to a specific File Transfer Protocol (FTP) site when event is triggered. Users can assign alarm message to up to two FTP sites. Enter the FTP details, which include server, server port, user name, password and remote folder, in the fields. Check the box "passive mode" to be connected with the FTP server by passively receiving the FTP server's IP address through a dynamic port. Alternatively, uncheck the box to directly connect the FTP server via active mode. Click on when finished. 47
47
6.3.6
FTP
The FTP setting can be found under this path: System> FTP.
The Administrator can set as sending alarm message to a specific File Transfer
Protocol (FTP) site when event is triggered. Users can assign alarm message to
up to two FTP sites. Enter the FTP details, which include server, server port,
user name, password and remote folder, in the fields. Check the box “passive
mode” to be connected with the FTP server by passively receiving the FTP
server’s IP address through a dynamic port. Alternatively, uncheck the box to
directly connect the FTP server via active mode.
Click on <Save> when finished.