LevelOne FCS-5061 Manual - Page 26
Host Name and System Time Setting, Host Name, Time Zone, Enable Daylight Saving Time
View all LevelOne FCS-5061 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6.3.1 Host Name and System Time Setting Press the first category: in the left column; the page is shown as below. Host Name The name is for camera identification. If alarm function (see section Application is enabled and is set to send alarm message by Mail/FTP, the host name entered here will display in the alarm message. The maximum length of the Host Name is 30 characters. Time Zone Select the time zone you are in from the drop-down menu. Enable Daylight Saving Time To enable DST, please check the item and then specify time offset and DST duration. The format for time offset is [hh:mm:ss]; for instance, if the amount of time offset is one hour, please enter "01:00:00" into the field. 26
26
6.3.1
Host Name and System Time Setting
Press the first category: <System> in the left column; the page is shown as
below.
Host Name
The name is for camera identification. If alarm function (see section
Application
is enabled and is set to send alarm message by Mail/FTP, the host name
entered here will display in the alarm message. The maximum length of the
Host Name is 30 characters.
Time Zone
Select the time zone you are in from the drop-down menu.
Enable Daylight Saving Time
To enable DST, please check the item and then specify time offset and DST
duration. The format for time offset is [hh:mm:ss]; for instance, if the amount of
time offset is one hour, please enter “01:00:00” into the field.