LevelOne FCS-5061 Manual - Page 58

54

Upload Image by E-Mail

Select this item and the Administrator can assign an e-mail address and

configure various parameters. When motion is detected, event images will be

sent to the appointed e-mail address.

<Pre-trigger buffer> function allows users to check what happened to cause

the trigger. The <Pre-trigger buffer> frame rate could be pre-determined.

On the other hand, <Post-trigger buffer> is for users to upload certain amount

of images after the motion event occurs.

Check the box <Continue image upload> to upload the triggered images

during certain time or keep uploading until the trigger is off. Select <Upload

for __sec> and enter the duration in the blank. The images of the duration will

be uploading by E-mail when the motion event occurs. The setting range is

from 1 to 9999 seconds. Select <Upload during the trigger active> to make

the images keep being uploaded to E-mail during the trigger active until the

event stops. Set the Image frequency as the upload frame rate. The setting

range is from 1 frame to 15 frames.

Send HTTP notification

Check this item, select the destination HTTP address, and specify the

parameters for event notifications by <Motion Detection> triggered. When an

alarm is triggered, the notification can be sent to the specified HTTP server.

For instance, if the custom parameter is set as” action=1&group=2”, and the

HTTP server name is” http://192.168.0.1/admin.php”, the notification will be

sent to HTTP server as” http://192.168.0.1/admin.php?action=1&group=2”

when alarm is triggered.

File Name

Enter a file name in the blank, ex. image.jpg. The uploaded image’s file name format

can be set in this section. Please select the one that meets your requirements.

Add date/time suffix

File name: imageYYMMDD_HHNNSS_XX.jpg

Y: Year, M: Month, D: Day

Section	Page
1. Overview	5
1.1 Features	5
1.2 Package Contents	6
1.3 Dimensions	7
1.4 Connectors	8
2. Camera Cabling	10
2.1 Connect Power	10
2.2 Connect Ethernet Cable	11
2.3 Connect Alarm I/O	11
3. Installation	12
3.1 Ceiling/Wall Mounting	12
4. System Requirements	13
5. Accessing Camera	14
5.1 Using Recording Software	18
5.2 Installing DC Viewer Software Online	19
6. Configuration & Operation	21
6.1 Browser-based Viewer Introduction	21
6.2 Home Page	23
6.3 System Related Settings	25
6.3.1 Host Name and System Time Setting	26
6.3.2 Security	27
6.3.2.1 User	28
6.3.2.2 HTTPS	30
6.3.2.3 IP Filter	32
6.3.2.4 IEEE 802.1X	33
6.3.3 Network	35
6.3.3.1 Basic	36
6.3.3.2 QoS	39
6.3.3.3 SNMP	41
6.3.3.4 UPnP	43
6.3.4 DDNS	45
6.3.5 Mail	46
6.3.6 FTP	47
6.3.7 HTTP	48
5.3.8 Application	49
6.3.9 Motion Detection	54
6.3.10 Network Failure Detection	60
6.3.11 Tampering	62
6.3.12 Storage Management (Local Recording)	65
6.3.13 Recording (Local Recording)	67
6.3.14 File Location (Snapshots and Web Recording)	68
6.3.15 View Information	69
6.3.15.1 Log File	70
6.3.15.2 User Information	71
6.3.15.3 Parameters	72
6.3.16 Factory Default	73
6.3.17 Software Version	74
6.3.18 Software Upgrade	75
6.3.19 Maintenance	77
6.4 Streaming	79
6.4.1 Video Resolution and Rotate Type	80
6.4.2 Video Compression	82
6.4.3 Video ROI	83
6.4.4 Video OCX Protocol	85
6.4.5 Video Frame Rate	86
6.4.6 Video Mask	87
6.4.7 Audio (Audio Mode and Bit Rate Settings)	88
6.5 Camera Settings	90
6.5.1 Exposure Setting	91
6.5.2 White Balance Setting	92
/6.5.3 Brightness Setting	93
6.5.4 Backlight	94
6.5.5 Digital Zoom	94
6.5.6 IR Function	94
6.5.7 WDR Function	95
6.5.8 Noise Reduction	95
6.5.9 TV System Setup	96
6.6 Logout	96
Appendix A: Technical Specifications	97
Appendix B: Internet Security Settings	99
Appendix C: DC Viewer Download Procedure	102

LevelOne FCS-5061 Manual - Page 58

Upload Image by E-Mail, Send HTTP notification, File Name, Add date/time suffix, alarm is triggered

Page 58 highlights