Lexmark 560n User's Guide - Page 151
Hard Drive Full, Insert <color>, Insert Fuser, Restart Printer, Insert Transfer Unit, Insert Tray 2
UPC - 734646059534
View all Lexmark 560n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Restart Printer 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Check all cable connections. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. If the message appears again, contact Customer Support, and report the message. Hard Drive Full Error 016-982 Press OK There is insufficient memory to complete the current print job. Press OK to clear the message, and then cancel the print job and try sending it again. Insert Print Cartridge Error 093- The specified print cartridge is missing or not installed correctly. Reinstall the print cartridge. Insert Fuser, Restart Printer The fuser is not installed. Install the fuser. Insert Transfer Unit The transfer belt is missing or not installed correctly. Reinstall the transfer belt. Insert Tray 2 Tray 2 is missing or not installed correctly. Install or reseat Tray 2. Invalid Job Error 016-799 Press OK The configuration of the printer in Print Properties does not match the printer being used. 1 Press Stop to cancel the print job. 2 Check the Print Properties settings. 3 Press OK to continue. Understanding printer messages 151