Lexmark 560n User's Guide - Page 42
Loading paper and specialty media, Loading Tray 1 (MPT - envelope feeder
UPC - 734646059534
View all Lexmark 560n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Loading paper and specialty media This section shows how to load the multipurpose feeder (Tray 1), the 250-sheet tray (Tray 2), and the optional 550sheet tray (Tray 3). Loading Tray 1 (MPT) In addition to plain paper, Tray 1 (MPT) can use various other sizes and types of paper or specialty media, such as envelopes and transparencies. Notes: • Make sure Tray 2 is completely installed before opening Tray 1 (MPT). • Load up to 150 sheets or a stack of paper that weighs 60-216 g/m2 and is less than 15 mm (.59 in.) high. The minimum paper size supported is 76.2 x 127 mm (3 x 5 in.). • Tray 1 (MPT) supports paper or specialty media within the following dimensions: 76.2 x 127 mm-220.0 x 355.6 mm (3 x 5 in.-.8.66 x 14 in.). • For duplex printing, you can load paper that is 64-163 g/m2. • Do not load different types of paper at the same time. • Do not remove or add paper to Tray 1 (MPT) when printing, or if there is any paper still in the tray. Doing so may cause a paper jam. • Do not put any objects other than paper in Tray 1 (MPT). • Always load paper short edge first. To load paper in Tray 1 (MPT): 1 Gently pull open the Tray 1 (MPT) cover. Loading paper and specialty media 42