Lexmark C540 Service Manual - Page 197
USB port connector removal, USB port and cable for portable flash drive
View all Lexmark C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
5025-2xx, 4xx USB port connector removal See "USB port and cable (for portable flash drive)" on page 7-8 for the part number. The FRU includes the USB port connector and cable. 1. Remove the operator panel. See "Operator panel removal" on page 4-9. 2. Remove the right cover assembly. See "Right cover assembly removal" on page 4-10. 3. Remove the waste toner bottle. See "Waste toner bottle removal" on page 4-60. 4. Remove the rear shield. See "Rear shield removal" on page 4-11. 5. Remove the rear screw (A) in the waste toner bottle sensor contact to allow access to the cable cover. Note: The waste toner bottle sensor contact does not need to be unplugged or removed. 6. Remove the four screws (B) from the cable cover. 7. Disconnect the USB port cable (C) from the controller board. Repair information 4-59