Lexmark MX321 Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 28

Printer and Host Timeout Values

Get Lexmark MX321 PDF manuals and user guides View all Lexmark MX321 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

27 Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the host. Use the tables below to verify the timeout settings in the printer and on the host. AS/400 or iSeries host and Printer IPDS Timeout Values Host Controlled Host Controlled Host Controlled Host Controlled 15 sec to 10 Min 15 sec to 10 Min 15 sec to 10 Min 15 sec to 10 Min AS/400 or iSeries Release Timer *SEC15 AS/400 or iSeries Device Description Valid Port Number 5001 Note *SEC30 5001 Specific Number of Seconds 5001 1 *NOMAX None 2 *SEC15 5001 3 *SEC30 5001 3 Specific Number of Seconds 5001 3 *NOMAX 5001 4 Note 1: The number of seconds should be greater than or equal to 15 seconds. Note 2: This timer combination is not recommended. The printer will remain busy after the IPDS job has completed. Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print. Note 3: These timer combinations are not recommended. If used, the difference between the two timers should be a minimum of 30 seconds. Note 4: A printer IPDS Timeout value of 15 sec or 30 sec is recommended. This allows 15 or 30 seconds for the host to send another job before the printer times out and starts printing jobs waiting on other ports. MVS host and Printer IPDS Timeout Values Host Controlled Host Controlled 15 sec to 10 Min 15 sec to 10 Min STARTUP PROC Disconnect Interval (DISCINTV) Specific Number of Seconds 0 Specific Number of Seconds 0 STARTUP PROC Valid Port Number (PORTNO) 5001 None 5001 5001 Note 1 2 3 4 Note 1: The number of seconds should be greater than or equal to 15 seconds. Note 2: This timer combination is not recommended. The printer will remain busy after the IPDS job has completed. Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print. Note 3: This timer combination is not recommended. If used, the difference between the two timers should be a minimum of 30 seconds. Note 4: A printer IPDS Timeout value of 15 sec or 30 sec is recommended. This allows 15 or 30 seconds for the host to send another job before the printer times out and starts printing jobs waiting on other ports.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
27
Printer and Host Timeout Values
Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when
printing IPDS jobs.
Selection of some values will cause communication problems between the printer and the host.
Use the tables below to verify the timeout settings in the printer and on the host.
AS/400 or iSeries host and Printer IPDS Timeout Values
AS/400 or iSeries Release Timer
AS/400 or iSeries Device Description
Valid Port Number
Note
Host Controlled
*SEC15
5001
Host Controlled
*SEC30
5001
Host Controlled
Specific Number of Seconds
5001
1
Host Controlled
*NOMAX
None
2
15 sec to 10 Min
*SEC15
5001
3
15 sec to 10 Min
*SEC30
5001
3
15 sec to 10 Min
Specific Number of Seconds
5001
3
15 sec to 10 Min
*NOMAX
5001
4
Note 1:
The number of seconds should be greater than or equal to 15 seconds.
Note 2:
This timer combination is not recommended. The printer will remain busy after the IPDS job has completed.
Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print.
Note 3:
These timer combinations are not recommended. If used, the difference between the two timers should be
a minimum of 30 seconds.
Note 4:
A printer IPDS Timeout value of 15 sec or 30 sec is recommended.
This allows 15 or 30 seconds for the host
to send another job before the printer times out and starts printing jobs waiting on other ports.
MVS host and Printer IPDS Timeout Values
STARTUP PROC Disconnect
Interval (DISCINTV)
STARTUP PROC Valid Port Number
(PORTNO)
Note
Host Controlled
Specific Number of Seconds
5001
1
Host Controlled
0
None
2
15 sec to 10 Min
Specific Number of Seconds
5001
3
15 sec to 10 Min
0
5001
4
Note 1:
The number of seconds should be greater than or equal to 15 seconds.
Note 2:
This timer combination is not recommended. The printer will remain busy after the IPDS job has completed.
Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print.
Note 3:
This timer combination is not recommended.
If used, the difference between the two timers should be a
minimum of 30 seconds.
Note 4:
A printer IPDS Timeout value of 15 sec or 30 sec is recommended.
This allows 15 or 30 seconds for the host
to send another job before the printer times out and starts printing jobs waiting on other ports.