Lexmark MX617 User Guide - Page 151
Parallel [x] menu, Job Buffering, Notes, Mac Binary PS, ENA Address, ENA Netmask, ENA Gateway
View all Lexmark MX617 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Understanding the printer menus 151 Use Job Buffering Off On Auto Mac Binary PS On Off Auto ENA Address yyy.yyy.yyy.yyy ENA Netmask yyy.yyy.yyy.yyy ENA Gateway yyy.yyy.yyy.yyy To Temporarily store print jobs in the printer hard disk before printing. Notes: • Off is the factory default setting. • On buffers jobs on the printer hard disk. • Auto buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated. Set the printer to process Macintosh binary PostScript print jobs. Notes: • Auto is the factory default setting. • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Set the network address information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Set the netmask information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Set the gateway information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Parallel [x] menu Note: This menu appears only when an optional parallel card is installed. Use PCL SmartSwitch On Off To Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.