Lexmark MX617 User Guide - Page 260

Troubleshooting 260 Maintenance kit nearly low [80.xy] For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Maintenance kit very low, [x] estimated pages remain [80.xy] You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Memory full [38] Try one or more of the following: • From the printer control panel, touch Cancel job to clear the message. • Install additional printer memory. Memory full, cannot print faxes From the control panel, do either of the following: • Touch Continue holding faxes without printing to clear the message. • Touch Attempt to print to restart the printer and continue printing. Network [x] software error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non‑Lexmark [supply type], see User's Guide [33.xy] Note: The supply type can be toner cartridge or imaging unit. The printer has detected a non‑Lexmark supply or part installed in the printer. Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of thirdparty supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. For more information, see "Using genuine Lexmark parts and supplies" on page 225.