Lexmark MX718 Embedded Web Server--Security: Administrator s Guide - Page 41
Connecting to a wireless network, Submit, Settings, Network/Ports, Wireless
View all Lexmark MX718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Securing network connections 41 Setting Connections Pre‑Shared Key Authenticated Connections Host 1 Host 2 Host 3 Host 4 Host 5 Host 6 Host 7 Host 8 Host 9 Host 10 Certificate Authenticated Connections Host 1 Host 2 Host 3 Host 4 Host 5 Settings DH Group Encryption Authentication Certificate Validation Validate Peer Certificate On* Off Select Device Certificate * This is the factory default setting. 3 Click Submit. Description Configure the authenticated connections of your printer. • For Hosts 1-10, the following settings can be configured: - Address-You can type a maximum of 45 bytes of characters. - Key-You can type a maximum of 256 bytes of characters. • For Hosts 1-5, the following setting can be configured: - Address[/subnet]-You can type a maximum of 59 bytes of characters. Specify the encryption and authentication methods of your printer. Select an option for each setting. Connecting to a wireless network Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with your wireless network adapter. 1 From the Embedded Web Server, click Settings > Network/Ports > Wireless. 2 Modify the settings to match the settings of your access point (wireless router). Note: Make sure to enter the correct SSID. 3 Click Submit.