LiftMaster Miracle-One MIRACLE ONE Manual - Page 3
ETL LISTINGS AND INSTRUCTIONS, Installation Instructions Regarding the Gate Operator
View all LiftMaster Miracle-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ETL LISTINGS AND INSTRUCTIONS Installation Instructions Regarding the Gate Operator A) Install the gate operator only when: 1. The operator is appropriate for the construction and the usage class of the gate. 2. All exposed pinch points are eliminated or guarded, and 3. Guarding is supplied for exposed rollers. B) The operator is intended for installation only on gates used for vehicles. Pedestrians must be supplied with a separate access opening. C) The gate must be installed in a location so that enough clearance is supplied between the gate and adjacent structures when opening and closing to reduce the risk of entrapment. Swinging gates shall not open into public access areas. D) The gate must be properly installed and work freely in both directions prior to the installation of the gate operator. E) Controls must be far enough from the gate so that the user is prevented from coming in contact with the gate while operating the controls. Controls intended to be used to reset an operator after 2 sequential activations of the entrapment protection device or devices must be located in the line of sight of the gate outdoor. Easily accessible controls shall have a security feature to prevent unauthorized use. F) All warning signs and placards must be installed where visible in the area of the gate. A minimum of two placards shall be installed. A placard is to be installed in the area of each side of the gate and be visible to person located on the side of the gate on which the placard is installed. 2