Lowrance HDS-7 Gen2 Touch Operation Manual - Page 104
Device list, Diagnostics
View all Lowrance HDS-7 Gen2 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Damping accomplishes this by averaging the data. The higher the damping level, the more data history will be averaged. As a result, higher damping levels cause a delayed response to changes in the data. Device list Tap device list to view all devices connected to a NMEA 2000 network. You can configure and calibrate (where applicable) devices shown on the device list. 102 | Calibrating devices Devices that can be calibrated from the device list will have a Calibrate button on the Device information dialog. Tap Calibrate and follow the onscreen instructions to calibrate the device. ¼¼ Note: for more information on device calibration, refer to the documentation that came with your device. Diagnostics Used to view NMEA 2000 network information and the status of information shared between units. From the UDB tab, you can see IP addresses of attached Ethernet devices and if an Ethernet cable is connected or unplugged. Networking | Lowrance HDS Gen2 Touch