Lowrance HDS-7 Gen2 Touch Operation Manual - Page 42
Steer
View all Lowrance HDS-7 Gen2 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Steer page The Steer page can be used to display information when you are navigating. Data fields Off course limit Course line Vessel symbol Data fields The Steer page displays the following information: DTD Distance to destination XTE Cross track error SOG Speed over ground TTD Time to destination COG Course over ground POS Position The course line When traveling on a route the course line shows the intended course from one waypoint towards the next. When navigating towards a waypoint (cursor position, MOB or an entered lat/lon position), the course line will show the intended course from the point at which navigation was started towards the next waypoint. Vessel symbol The vessel symbol indicates distance and bearing relative to the intended course. Off course limit If the XTE exceeds the defined off course limit this will be indicated with a red arrow including the distance from the track line. If the off course alarm is enabled, the alarm will activate if the XTE exceeds the defined off course limit. 40 | Navigating | Lowrance HDS Gen2 Touch