MSI FM2 User Guide - Page 36
Jumper
View all MSI FM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Getting Started Jumper JUSB_PW1~2: USB Power Jumper The USB ports on the rear IO panel are controlled by JUSB_PW2. The JUSB1, JUSB2 and JUSB3 are controlled by JUSB_PW1. These jumpers allow you to enable/ disable the "wakeup from S3/S4/S5 by USB and PS/2 device" function 1 Close 1-2 BATT + JUSB_PW2 (for back panel USB connectors) Keep USB power to VCC5 (default) 1 Close 2-3 Keep USB power to 5VSB 1 BATT + JUSB_PW1 (for on-board USB connectors) Close 1-2 Keep USB power to VCC5 (default) 1 Close 2-3 Keep USB power to 5VSB Important If you set the jumper to Enabled, the power supply must be able to provide at least 2A currents. 1-24
1-24
Gett±ng Started
Jumper
JUSB_PW1~2: USB Power Jumper
The USB ports on the rear IO panel are controlled by JUSB_PW2. The JUSB1, JUSB2
and JUSB3 are controlled by JUSB_PW1. These jumpers allow you to enable/ d±sable
the “wakeup from S3/S4/S5 by USB and PS/2 dev±ce” funct±on
Close 1-2
Keep USB power to
VCC5 (default)
(for back panel USB connectors)
1
Close 2-3
Keep USB power to
5VSB
1
JUSB_PW2
Close 1-2
Keep USB power to
VCC5 (default)
(for on-board USB connectors)
1
Close 2-3
Keep USB power to
5VSB
1
JUSB_PW1
BATT
+
BATT
+
Important
If you set the jumper to Enabled, the power supply must be able to prov±de at least 2A
currents.