MSI FM2 User Guide - Page 47
Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
View all MSI FM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
MS-7721 Chapter 2 ▶ Wake Up Event Setup Press to enter the sub-menu. ▶ Wake Up Event By Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS. ▶ Resume By RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date. ▶ Date/ HH:MM:SS If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the and to select the date & time settings). ▶ Resume By PCI or PCI-E Device When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCI or PCIe device. ▶ Resume From S3 by USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. ▶ Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard These items determine whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse/ keyboard is detected. Boot ▶ Full Screen Logo Display This item enables this system to show the company logo on the boot-up screen. [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. ▶ Boot Mode Select Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. [UEFI] Enables UEFI BIOS boot mode support only. [LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot mode. == FIXED BOOT ORDER Priorities== ▶ Boot Option #1~N These items are used to prioritize the installed boot devices. ▶ USB Key Drive BBS Priorities This item is used to prioritize the installed USB drives. Save & Exit ▶ Discard Changes and Exit Use this item to abandon all changes and exit setup. 2-9