Mackie PPM1008 Owner's Manual - Page 6

PPM1008 Hookup Diagrams Microphones Adjust Vocal Compression press HI-Z button press HI-Z button Front Panel Power Amp Mode switch set to Stereo Mains Rear Panel Keyboards Portable Recorder SRM450 v2 Powered Stage Monitors (plays mon 1 output) HD1801 Powered Subwoofers (plays main mix below 100 Hz) C300z Passive Speakers (plays stereo main mix) This diagram shows microphones attached to channels 1 and 2, electric guitars connected directly to channels 5 and 6 (with hi-z switch pressed in), and a keyboard attached to channel 7's stereo inputs. A portable recorder is attached to the stereo tape outputs to record the performance. Mackie SRM450v2 powered monitors are connected to the monitor 1 send, and play as stage monitors. The mon 1 controls of each channel allow you to set up a stage monitor mix that is independent of the main mix. C300z passive speakers are connected to the speaker-level power output of the powered mixer, and they play the main stereo mix to your audience. HD1801 powered subwoofers are connected to the main mix sub out, to reinforce the low end in your system. 6 PPM1008 Small Club System