Mackie PPM1008 Owner's Manual - Page 8

PPM1008 Wireless Microphone Microphones Front Panel Power Amp Mode switch set to Stereo Mains Rear Panel Graphic EQ Wireless Mic Receiver iPodTM Docking Station Mackie d.2 Pro DJ Production Console MAIN OUT L R BOOTH LINE L L MIC FX SEND PGM 2 PGM 1 PHONO CD PHONO CD RL LL L ~100-240 VAC 50-60Hz 20W LIVE RECORD R L RETURN L(MONO) R R LINE PHONO RR GND LINE PHONO R GND MIC R Power Amplifier Turntables with phono-level output Passive Subwoofers (plays main mix below 100 Hz) C300z Passive Speakers (plays stereo main mix) This diagram shows a wireless microphone receiver connected to the channel 1 line input, a graphic EQ connected to channel 1's insert jack (to help control feedback in the wireless mic), a microphone connected to channel 2, and an iPod docking station attached to channel 8's RCA inputs. A Mackie d.2 Pro DJ production console is connected to two turntables, and its RCA output connects to the powered mixer's channel 7 stereo RCA inputs. Use the d.2 Pro's advanced DJ controls to get the best performance from your records. Use the powered mixer to play the d.2 Pro output, and control the mics and iPod. The power amp mode switch is set to play the stereo main mix in the C300z passive speakers, connected to the speaker-level power outputs. Passive subwoofers are powered by an amplifier connected to the main mix sub out, to reinforce the low end in your main mix. 8 PPM1008 DJ System