Magellan MobileMapper CE Getting Started Guide - Page 27
Step 2: Allow the Cell Phone to Be Paired with MobileMapper CE, Ask for a Paired Bluetooth Link
UPC - 763357115567
View all Magellan MobileMapper CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English Ask for a Paired Bluetooth Link This procedure is for securing and quickly re-establishing the Bluetooth connection between the two units. 1. Tap and hold the cell phone icon. 2. When a dotted circle appears, remove the stylus and, in the menu that pops up, select Pair. A new window opens in which you should enter a pin number to secure the connection to the cell phone (see below). Enter a Pin Code 1. Tap inside the Pin field and type in any number. A two- to four-figure number is recommended. (Press the Shift key twice to lock the keypad in numeric.) You will have to remember this number in step 2 below. Note that this number may be different from the one entered in the Bluetooth Properties dialog (see PIN Code, Detectability & Authentication on page 51). 2. Tap OK to enter the pin code and close the dialog box. This causes the cell phone to display a message or menu following the pairing request from MobileMapper CE. Step 2: Allow the Cell Phone to Be Paired with MobileMapper CE On the cell phone, following the message triggered by the pairing request from MobileMapper CE, allow a new pair of Bluetooth devices to be created between MobileMapper CE and the cell phone: 1. Select the appropriate function depending on the cell phone used. For example on the Sony/EricssonT68i, select "Add to Paired". 2. You will then be asked to enter the pin number you have previously defined in MobileMapper CE (see Step 1). When the units have successfully been paired, a yellow circle containing a padlock will appear on the cell phone icon on MobileMapper CE (see example opposite). 21