Magellan MobileMapper CE Getting Started Guide - Page 47
Power & Memory Management, Power Modes
UPC - 763357115567
View all Magellan MobileMapper CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
English Power & Memory Management Power Modes MobileMapper CE comes with a removable/rechargeable battery, which provides enough energy for a full working day -provided you start your day with a fully charged battery. In order to ensure a longer battery life, use the external power whenever possible. When used, the external power source also automatically recharges the internal battery. The built-in advanced power saving features also help to optimize power consumption while the system is idle. The MobileMapper CE system has three power saving modes when the battery power is used: 1. User Idle mode: Backlights for both the display and keypad are switched off. Press any key or tap on the screen to switch on the backlights again. To switch off the backlights, tap (backlight) in Control Panel. In the Backlight Control dialog that opens (see figure opposite), tap the Backlight OFF button. 2. System Idle mode: The display as well as the backlights are switched off, but all the processes are still running. The power LED is on. Press any key or tap on the screen to switch on the display again. 3. Full Shut Down Mode: The system is shut down. The MobileMapper CE is switched off. The Power LED is off. You can configure the MobileMapper CE handheld to automatically enter each mode when it has been idle for a specified time. To change the idle time, tap Power in the Control Panel. Then make the necessary changes in the Schemes tab (see op- posite.) 41