Marantz MV8300 User Guide - Page 13

EN 13 Tuner Setting ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". Setting channels automatically - Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (੬ pg. 14). 1 Access Main Menu screen 2 Access Tuner Set Up screen Press MENU. 1 Press @ # to move the arrow to "TUNER SET UP", then press fi or OK. 2 Press @ # to move the arrow to "TUNER SET", then press fi or OK. FUNCTION SET UP TUNER SET TUNER SET UP INITIAL SET UP DBS SET UP CABLE SET UP VCR CABLE TV /DBS BAND AUTO CH SET MANUAL CH SET TV MENU OK SELECT EXIT SELECT WITH ARROW KEYS THEN PRESS [OK] 3 Perform Auto Channel Set You can automatically set the receivable channels in your area in the order of their frequencies. Press %fi to move the arrow to "AUTO CH SET", then press OK. FUNCTION SET UP TUNER SET TUNER SET UP INITIAL SET UP DBS SET UP CABLE SET UP BAND AUTO CH SET MANUAL CH SET TV MENU OK SELECT EXIT SELECT WITH ARROW KEYS THEN PRESS [OK] 14 23 FUNCTION SET UP TUNER SET UP INITIAL SET UP DBS SET UP NOTES: TUNER SET CABLE SET UP AUTO CHANNEL SET ● When Auto Channel SCANNING...Set is complete, PRESS [MENU] TO END "SCAN COMPLETED" appears on screen. OK SELECT WITH ARROW KEYS ● If the scan was SELECT THEN PRESS [OK] EXIT unsuccessful, "SCAN COMPLETED - NO SIGNAL FOUND -" appears on screen. Check the connections, then select "RETRY" to start again, or select "EXIT". MENU 4 Return to normal screen Press MENU. INFORMATION The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set Up screen.