Marantz MV8300 User Guide - Page 27

Marantz MV8300 Manual

Get Marantz MV8300 PDF manuals and user guides View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

EN 27 S-VHS/VHS Recording To pause recording Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ). 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. To stop recording Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 ) on the front panel. 2 Select recording channel On the front panel: Press CHANNEL + or -. On the Remote: a- Press TV/VCR CH + or -. or b- Press the Number keys. To rewind the tape (when it is not running) Press REW ( 1 ). To fast-forward the tape (when it is not running) Press FF ( ¡ ). 3 Set recording speed 4 Start recording On the front panel: Press REC ( ¶ ). To eject the tape Press STOP/EJECT ( 7/0 ) on the front panel when the tape is not running. ● You can also eject the cassette when the VCR is turned off. Press REC SPEED to set the recording speed. On the Remote: While holding REC ( ¶ ), press PLAY ( 3 ). ● If "V. CALIBRATION" is set to "ON" (default setting: ੬ pg. 54), this VCR checks the tape condition for about seven seconds, then starts recording. This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the steps below: 1 Press REC ( ¶ ) and PAUSE ( 8 ) to start Video Calibration. 2 Then press PLAY ( 3 ) to start recording after Video Calibration is complete. To turn off the VCR Press POWER. Compatibility Of Cassettes And Recording Mode Recording Mode Cassette D-VHS D-VHS S-VHS VHS Yes No No S-VHS Yes Yes Yes* VHS Yes Yes Yes It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. * To record on the VHS cassette with S-VHS quality, use the S-VHS ET function (੬ pg. 59). NOTES: ● The D-VHS (MTP), S-VHS, S-VHS ET and VHS mode recordings are possible with this VCR. ● To record in the D-VHS mode, use a D-VHS cassette. ● To record in the S-VHS/VHS mode, you can use a D-VHS, S-VHS or VHS cassette. To record in S-VHS mode on D-VHS tapes: Press D-VHS to turn off the D-VHS indicator. Then, set "S-VHS MODE" to "ON" (੬ pg. 58). To record in VHS mode on D-VHS tapes: Press D-VHS to turn off the D-VHS indicator. Then, set "S-VHS MODE" to "OFF" (੬ pg. 58).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
EN
27
To pause recording
Press
PAUSE (
8
)
. To resume recording, press
PLAY (
3
)
.
To stop recording
Press
STOP (
7
)
on the Remote or
STOP/EJECT
(
7
/
0
)
on the front panel.
To rewind the tape (when it is not running)
Press
REW (
1
)
.
To fast-forward the tape (when it is not running)
Press
FF (
¡
)
.
To eject the tape
Press
STOP/EJECT
(
7
/
0
)
on the front panel when the
tape is not running.
●
You can also eject the cassette when the VCR is turned
off.
To turn off the VCR
Press
POWER
.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
S-VHS/VHS Recording
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
2
Select recording channel
On the front panel:
Press
CHANNEL +
or
–
.
On the Remote:
a
–
Press
TV/VCR CH +
or
–
.
or
b
–
Press the
Number
keys.
3
Set recording speed
Press
REC SPEED
to set the recording speed.
4
Start recording
On the front panel:
Press
REC (
)
.
On the Remote:
While holding
REC (
)
, press
PLAY (
3
)
.
●
If
“
V. CALIBRATION
”
is set to
“
ON
”
(default
setting:
±
pg. 54), this VCR checks the tape
condition for about seven seconds, then starts
recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1
Press
REC (
)
and
PAUSE (
8
)
to start
Video Calibration.
2
Then press
PLAY (
3
)
to start recording
after Video Calibration is complete.
Compatibility Of Cassettes And Recording Mode
Cassette
Recording Mode
D-VHS
S-VHS
VHS
D-VHS
Yes
Yes
Yes
S-VHS
No
Yes
Yes
VHS
No
Yes*
Yes
* To record on the VHS cassette with S-VHS quality, use the
S-VHS ET function (
±
pg. 59).
NOTES:
●
The D-VHS (MTP), S-VHS, S-VHS ET and VHS mode
recordings are possible with this VCR.
●
To record in the D-VHS mode, use a D-VHS cassette.
●
To record in the S-VHS/VHS mode, you can use a D-VHS,
S-VHS or VHS cassette.
To record in S-VHS mode on D-VHS tapes:
Press
D-VHS
to turn off the D-VHS indicator. Then, set
“
S-VHS MODE
”
to
“
ON
”
(
±
pg. 58).
To record in VHS mode on D-VHS tapes:
Press
D-VHS
to turn off the D-VHS indicator. Then, set
“
S-VHS MODE
”
to
“
OFF
”
(
±
pg. 58).