Marantz MV8300 User Guide - Page 20
Marantz MV8300 Manual
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 EN VCR CABLE TV /DBS INITIAL SETTINGS (cont.) 5 Enter DBS Receiver's brand Press %fi to move the arrow to "BRAND". Press @ # to enter the brand code from the following list. FUNCTION SET UP DBS SET UP TUNER SET UP INITIAL SET UP INPUT CH BRAND TEST MODE OFF 40 MENU OK SELECT EXIT SELECT WITH ARROW KEYS THEN PRESS [OK] BRAND JVC (DISH Network) ECHOSTAR (DISH Network) SONY (DSS) RCA (DSS) CODE 51 51 41 40 6 Engage test mode 7 56 NOTE: Press %fi to move the arrow to "TEST MODE", then press OK. The program currently received through the DBS receiver appears for about 10 seconds. If you do not engage the test mode in step 6, "INPUT CH" and "BRAND" are not set. NOTES: ● The Controller may not work with all types of DBS receiver. ● If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. In addition, if your DBS receiver is equipped with a timer, you can also use "Satellite Auto Recording" (੬ pg. 62). ● The VCR can only change the satellite channel through the Controller during timer recording. ● If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. ● For customers in U.S.A.: If you are unable to set the Controller, contact your Marantz authorized dealer. ● If the DBS receiver's channel changes to 205, setting is complete Press @ # to move the arrow to "YES", INPUT CH OFF then press OK and DID YOUR DBS RECEIVER CHANGE TO CHANNEL 205? "DBS RECEIVER CONTROL IS ON" appears on the OK SELECT WITH ARROW KEYS SELECT THEN PRESS [OK] EXIT screen for about 5 seconds. ● If the DBS receiver's channel does not change as shown above 1 Press @ # to move the arrow to "NO". 2 Press OK. 3 Re-enter the correct code. FUNCTION SET UP DBS SET UP TUNER SET UP INITIAL SET UP YES NO MENU 7 Return to normal screen Press MENU.