Marantz MV8300 User Guide - Page 63

EN 63 JLIP ID Number Setting ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device. When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number. The JLIP ID number of this VCR is preset to "1" when shipped from the factory. You can change this number to any other number between 1 to 99. To change the JLIP ID number of this VCR, follow the procedure below. VCR CABLE TV /DBS 1 Access Main Menu screen 2 Select JLIP ID Set Up screen Press MENU. 1 Press @ # to move the arrow to "INITIAL SET UP", then press fi or OK. 2 Press @ # to move the arrow to "OTHER", then press fi or OK. 3 Set JLIP ID Number Press %fi to move the arrow to "JLIP ID". Press @ # to enter the desired ID number. FUNCTION SET UP CLOCK SET TUNER SET UP INITIAL SET UP OTHER GUIDE CHANNEL JLIP ID LINC RESET NUMBER 1 AUTO MENU OK SELECT EXIT SELECT WITH ARROW KEYS THEN PRESS [OK] 14 23 4 Return to normal screen Press MENU. NOTE: For further details on the JLIP system, consult your Marantz authorized dealer or visit our website www.marantz.com.