Marantz MV8300 User Guide - Page 56
Marantz MV8300 Manual
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
56 EN Input/Output settings [IN/OUT FUNCTION] Ⅵ TV OUTPUT 1 720to1080 NO CONV. ALLto480i OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. Select the apppropriate mode when receiving signals via i.LINK connector or playing back a D-VHS tape containing a recording of an HD (High Definition) signal: 720to1080: 720p is up-converted to 1080i and output to the TV. 1080i, 480p, and 480i image formats are output to the TV without being converted. Select this when the 720p image played back is distorted. 1080i, 720p, 480p, and 480i image formats are output to the TV just as they are. All images will be output to the TV in 480i image format. NO CONV.: ALLto480i: NOTE: When you receive signals via i.LINK connector or play back the picture of 1080i, 720p, 480p image format, the signal is not output from the S-VIDEO or VIDEO output connector if "TV OUTPUT 1" is set to "720to1080" or "NO CONV.". Ⅵ TV OUTPUT 2 WIDE 16:9 NORMAL 4:3 Select the apppropriate mode depending on the type of TV you have. WIDE 16:9: NORMAL 4:3: Select this for a wide TV set with 16:9 screen image size. Select this for a TV set with 4:3 screen image size. NOTES: ● When "TV OUTPUT 2" is set to "WIDE 16:9", sometimes the screen image may be stretched vertically. ● When "TV OUTPUT 2" is set to "NORMAL 4:3", sometimes subtitles may not be visible or the ends of the screen image may be cut off. Normally select "WIDE16:9". ● In order to let the equipment determine the screen image size, it is recommended that you connect the VCR and TV using the component video output connectors or S VIDEO OUT connector. Ⅵ FRONT AUX F-1 VIDEO S-VIDEO You have to select which terminal - either VIDEO (composite) or S-VIDEO (Y/C separate signals) to use as the video input terminal on the front panel. Make sure to select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. You have to select which terminal - either VIDEO (composite) or S VIDEO (Y/C separate signals) to use as the video input terminal (L-1) on the rear panel. Make sure you select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. You have to select which terminal - either VIDEO (composite) or S VIDEO (Y/C separate signals) to use as the video input terminal (L-2) on the rear panel. Make sure you select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. Ⅵ REAR AUX L-1 VIDEO S-VIDEO Ⅵ REAR AUX L-2 VIDEO S-VIDEO