Marantz MV8300 User Guide - Page 55
Marantz MV8300 Manual
![]() |
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
EN 55 Audio settings [AUDIO FUNCTION] Ⅵ STD AUDIO REC MODE STANDARD PCM&STANDARD * The default setting is bold in the table below. You can select the audio format when you record a program or analog signal from connected devices in STD mode. When this function is set to "PCM&STANDARD", you can obtain high-quality audio sound. STANDARD: Select this when the picture quality is important and when you record in MP2 format. PCM&STANDARD: Select this when the sound quality is important. When you record the analog signals or DV signals from the camcorder in STD mode, PCM audio is also recorded in addition to MP2 audio. In HS mode, PCM audio is automatically recorded. Up to four audio signal channels can be input from a DV camcorder through the DV IN connector (i.LINK). This VCR allows you to select and record two of these channels. This setting is used to specify which two channels to record. When there are four DV audio channels (32kHz): AUDIO1: Records the two channels (L/R) of DV AUDIO 1. AUDIO2: Records the two channels (L/R) of DV AUDIO 2. 1+2MIX: Mixes and records both DV AUDIO 1 and 2. When there are two DV audio channels (48kHz): Because there are only two channels, those two channels are recorded regardless of the DV sound setting. Ⅵ DV AUDIO REC AUDIO1 AUDIO2 1+2MIX Ⅵ OPTICAL OUT Dolby D 2CH-PCM STREAM This VCR can send the Dolby Digital bitstream or PCM Audio to external devices. When you play back a tape including the Dolby Digital bitstream, and if you have a device equipped with Dolby Digital decoder, set this function to "Dolby D". If not, set this function to "2CH-PCM". "STREAM" will be used when playing back and receiving a audio signals in other new formats. This VCR COMPONENT VIDEO OUT Y PB/CB PR/CR VHF/UHF ANTENNA IN OUT S VIDEO IN IN(L-1) S VIDEO i.LINK IN/OUT DV IN S400 ANTENNA CABLE BOX REMOTE PAUSE/ AV COMPULINK R AUDIO L VIDEO R AUDIO L OUT VIDEO DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL IN(L-2) D THEATER REGION 1 Amplifier equipped with Dolby Digital decoder Note for connection: Remove the protection cap from the cable. Ⅵ 2ND AUDIO REC ON OFF When this function is set to "ON"; ● If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded. ● If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal tracks. When this function is set to "OFF", the SAP audio cannot be recorded. CONTINUED ON NEXT PAGE \
![](/manual_guide/products/marantz-mv8300-user-guide-e754630/55.png)