Marantz MV8300 User Guide - Page 74
Marantz MV8300 Manual
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
74 EN TIMER RECORDING SYMPTOM 7. Satellite channels are not automatically switched during timer recording. TROUBLESHOOTING (cont.) POSSIBLE CAUSE ● The Controller is not properly connected to the VCR. ● The input channel selected on the DBS Receiver Set screen is incorrect. ● The VCR is not set correctly to control the DBS receiver. ● The DBS receiver is turned off. CORRECTIVE ACTION Connect the Controller correctly (੬ pg. 18). After confirming your DBS receiver 's input channel number, re-access the DBS Receiver Set screen and select the correct number (੬ pg. 19). Set the correct DBS receiver brand code (੬ pg. 20). Make sure the power is on before timer recording starts. Set "INPUT CH" to "OFF" (੬ pg. 16, 19). 8. Timer recording begins as scheduled, but the channel is always incorrect. ● Even though you do not use an external cable box or DBS receiver, on the Cable Set Up screen or DBS Receiver Set screen, "INPUT CH" is set to "ON". ● The receivable stations in the new area are received on different channels than those in the previous area. ● All 24 programs of the VCR's timer memory are used. 9. You moved, and now VCR Plus+ system does not work properly. Re-perform the Changing VCR Plus+ Setting procedure (੬ pg. 36). 10. "PROGRAM FULL" is displayed on the screen. Wait until a space in memory clears, or cancel unnecessary program information (੬ pg. 40).