Marantz MV8300 User Guide - Page 78
Marantz MV8300 Manual
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
78 EN Error Codes and Messages CODE 102 MESSAGE REC PROHIBITED TROUBLESHOOTING (cont.) Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution. DESCRIPTION ● An attempt was made to make a D-VHS recording of a program for which only the analog information is copy protected. ● While making a D-VHS recording of a program, a signal in which only the analog information is copy protected was input to this VCR. ● An attempt was made to dub a D-VHS recording of a digitally copy protected program. ● While dubbing a D-VHS recording, digitally copy protected information was input to this VCR. ● This VCR supports copy protection technologies such as DTLA, and cannot record programs that employ digital copy protection. ● A signal that is not compatible with this VCR was input. ● Switch to the analog input for recording. (It may be possible to play back the material if using a digital tuner*, etc.) ● An attempt was made to make an S-VHS/VHS recording of a signal from an i.LINK device other than a digital tuner*. ● The i.LINK connector on this VCR is intended only for D-VHS recording. This VCR does not convert a digital signal into an analog signal for recording. Switch to the analog input for recording. ● An attempt was made to make an S-VHS/VHS recording using the timer function with "i.LINK" selected on the digital tuner* side. ● The i.LINK connector on this VCR is intended only for D-VHS recording. This VCR does not convert a digital signal into an analog signal for recording. Also, it is not possible to make a D-VHS recording on VHS tape. Switch to the analog input for recording. ● When 720p, 1080i signals are recorded in STD/LS3/LS5 mode, select HS mode to record program properly. ● An attempt was made to play back a signal that is not supported by this VCR. ● To play back the signal, use the digital tuner*, etc., that was used to record the signal. ● Normal playback is being prevented by mosaic noise, etc. ● Wait while the VCR calibrates itself so that it can output a normal image. ● When playing back a program that was copy protected in 1080i, 720p, or 480p mode, the VCR down-converts to 480i mode for output. ● An attempt was made to play back a tape containing a copy protected program. ● Even if you record a copy protected program, this VCR cannot play it back. ● An attempt was made to play back a tape containing an invalid D-VHS recording. ● A signal format that is not supported by this VCR was input. ● Use a digital tuner*, etc. ● A signal containing too much data was input to the i.LINK connector on this VCR. ● There are too many devices with i.LINK connectors, such as digital tuners and digital video cameras, connected to the i.LINK connector on this VCR. Turn off any devices that are not in use. ● When playing back a program that was copy protected in 1080i, 720p, or 480p mode, the VCR down-converts to 480i mode for output. 103 REC PROHIBITED 104 CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER CAN NOT REC DIGITAL INPUT BY S-VHS/VHS CHOOSE ANALOG INPUT 105 107 CAN NOT REC DIGITAL INPUT BY S-VHS/VHS USE ANALOG TIMER PROGRAMMING 108 200 REC BY HS MODE CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER 201 WAIT A MINUTE CALIBRATING...COPY RESTRICTED PROG OUTPUT 480i VIDEO COPY RESTRICTED PROG CAN NOT PLAY BACK 202 203 205 300 301 CAN NOT PLAY BACK THIS TAPE CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER TOO MANY i.LINK INSTRUMENTS READ INST.BOOK 302 COPY RESTRICTED PROG OUTPUT 480i VIDEO * For details of a digital tuner, refer to the instruction manual of the digital tuner.