Marantz PM-11S1 PM-11S1 User Manual - Page 21

TRIMMING, How to Trim Volume Level

Page 21 highlights

ENGLISH HOW TO USE AND SET FEATURES TRIMMING There are three trimming modes. • LEVEL trimming that adjusts the volume level on left and right channels • BASS trimming that adjusts the bass on left and right channels • TREBLE trimming that adjusts the treble on left and right channels Note Trimming is performed from the remote controller. TRIM : This button starts trimming. When multiple PM11S1s are connected, this button selects the amplifier with which to perform trimming. In such case, trimming is performed in the order of the lowest to highest ID number. EXIT : This button ends trimming. 3 : This button increases the trimming level. 4 : This button decreases the trimming level. 2 : This button selects the R channel for trimming. 1 : This button selects the L channel for trimming. ENTER: This button selects the trim mode (LEVEL, BASS or TREBLE). 7 How to Trim Volume Level The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0 - -9.0 dB range. When the PM11S1 is shipped from the factory, the volume level is set to 0.0 dB (maximum). 1. Press the TRIM button once to access the LEVEL trimming mode. 2. The flashing "0.0" on the left indicates that trimming is activated for the left channel volume level. Press the 3 and 4 buttons to set the volume level of the left channel. 3. Press the 2 button to set the right channel volume level. When the right side "0.0" starts flashing, trimming is activated for the right channel volume level. Press the 3 and 4 buttons to set the volume level of the right channel. OPEN/ CLOSE SOUND MODE PHONO BALANCED CD RECORDER 1 LINE 1 RECORDER 2 TRIM EXIT LINE 2 TONE + L R ENTER DISPLAY - ATT VOLUME 4. To trim the volume level of the ID 2 (slave) PM-11S1, press the TRIM button again and set volume level as in steps 1 - 3. After that, pressing the TRIM button again allows you to trim volume level with ID 3 (slave) PM-11S1 and so forth. 5. When finished with volume level trimming, press the EXIT button. RANDOM SCAN REPEAT TOP MENU RETURN AM/A FM/B MENU RC-11PMS1 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

17
ENGLISH
TRIMMING
There are three trimming modes.
LEVEL trimming that adjusts the volume level on left and
right channels
BASS trimming that adjusts the bass on left and right
channels
TREBLE trimming that adjusts the treble on left and right
channels
Note
Trimming is performed from the remote controller.
TRIM :
This button starts trimming. When multiple PM-
11S1s are connected, this button selects the
amplifier with which to perform trimming. In such
case, trimming is performed in the order of the lowest
to highest ID number.
EXIT :
This button ends trimming.
3
:
This button increases the trimming level.
4
:
This button decreases the trimming level.
2
:
This button selects the R channel for trimming.
1
:
This button selects the L channel for trimming.
ENTER:
This button selects the trim mode (LEVEL, BASS or
TREBLE).
HOW TO USE AND SET FEATURES
7
How to Trim Volume Level
The volume level of the left and right channels can be trimmed
in 0.5 dB steps across a 0.0 - -9.0 dB range. When the PM-
11S1 is shipped from the factory, the volume level is set to 0.0
dB (maximum).
1.
Press the TRIM button once to access the LEVEL trimming
mode.
2.
The flashing
0.0
on the left indicates that trimming is
activated for the left channel volume level. Press the
3
and
4
buttons to set the volume level of the left channel.
3.
Press the
2
button to set the right channel volume level.
When the right side
0.0
starts flashing, trimming is
activated for the right channel volume level. Press the
3
and
4
buttons to set the volume level of the right channel.
4.
To trim the volume level of the ID 2 (slave) PM-11S1, press
the TRIM button again and set volume level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim volume level with ID 3 (slave) PM-11S1 and so forth.
5.
When finished with volume level trimming, press the EXIT
button.
L
TRIM
RC-11PMS1
FM/B
AM/A
RETURN
TOP MENU
MENU
VOLUME
CLOSE
MODE
PHONO
CD
BALANCED
RECORDER 1
LINE 1
RECORDER 2
LINE 2
EXIT
TONE
ENTER
DISPLAY
ATT
SCAN
RANDOM
REPEAT
+
-
OPEN/
SOUND
R