Marantz PM-11S1 PM-11S1 User Manual - Page 22

ENGLISH HOW TO USE AND SET FEATURES 7 How to Trim Bass The bass level of the left and right channels can be trimmed in 2 dB steps across a -8.0 - +8.0 dB range. When the PM-11S1 is shipped from the factory, the bass level is set to 0 dB. To trim the bass level, activate tone control by pressing the TONE button on either the PM-11S1 or the remote controller. 1. Press the TRIM button once to access the LEVEL trimming mode. 7 How to Trim Treble The treble level of the left and right channels can be trimmed in 2 dB steps across a -8.0 - +8.0 dB range. When the PM11S1 is shipped from the factory, the treble level is set to 0 dB. To trim the treble level, activate tone control by pressing the TONE button on either the PM-11S1 or the remote controller. 1. Press the TRIM button once to access the LEVEL trimming mode. 2. Press the ENTER button once to access the BASS trimming mode. 2. Press the ENTER button twice to access the TREBLE trimming mode. 3. The flashing "0" on the left indicates that trimming is activated for the left channel bass level. Press the 3 and 4 buttons to set the bass level of the left channel. 3. The flashing "0" on the left indicates that trimming is activated for the left channel treble level. Press the 3 and 4 buttons to set the treble level of the left channel. 4. Press the 2 button to start the "0" on the right side flashing. When the right side "0" starts flashing, trimming is activated for the right channel bass level. Press the 3 and 4 buttons to set the bass level of the right channel. 4. Press the 2 button to start the "0" on the right side flashing. When the right side "0" starts flashing, trimming is activated for the right channel treble level. Press the 3 and 4 buttons to set the treble level of the right channel. 5. To trim the bass level of the ID 2 (slave) PM-11S1, press the TRIM button again and set bass level as in steps 1 - 3. After that, pressing the TRIM button again allows you to trim bass level with ID 3 (slave) PM-11S1 and so forth. 6. When finished with bass level trimming, press the EXIT button. 5. To trim the treble level of the ID 2 (slave) PM-11S1, press the TRIM button again and set treble level as in steps 1 - 3. After that, pressing the TRIM button again allows you to trim treble level with ID 3 (slave) PM-11S1 and so forth. 6. When finished with treble level trimming, press the EXIT button. 18