Maytag JSM900DAAP User Guide - Page 9

To attach the wire whip, flat beater or dough hook 1. Make sure that the touch wheel control is set to "OFF" and tile mixer is unplu_ed. 2. Press the mixer head release button and lilt the mixer i head up until it locks into place. 3. Insert desired attachment onto attachment post and press upward as tar as possible. 4. Turn the attachment clockwise, hooking the attachment to the post. 5. F,e sure the bowl is attached to the mixer betore operat ing (see page 7). ", 6. Lower the mixer head by pressing the mixer head release button and guiding the mixer heacl down caretullv with your hands. 7. Plug power cord into a grounded 3 prong electrical outlet. 8.Your mixer is adjusted at the tactory so that the fiat beater just clears the hot tom of the bowl. Should the fiat beater strike the bottom of the bowl or is too tar away fl'om the bowl, clearance can be corrected as h)llows: • Lilt mixer head. • Turn the mixer head adjustment screw counterclock wise to raise the head and clockwise to lower the head. • Make this adjustment using the fiat beater until it just clears the bottom of the bowl. Adjustment Screw