Maytag MGR5751BDQ Installation Manual - Page 10
How To Remove Range For Servicing, Service-parts Information - gas range
View all Maytag MGR5751BDQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
HOW TO REMOVE RANGE FOR SERVICING Follow these procedures to remove appliance for servicing: 1. Shut off gas supply to appliance. 2. Disconnect electrical supply to appliance, if equipped. 3. Disconnect gas supply tubing to appliance. 4. Slide range forward to disengage range from the anti-tip bracket. (See page 4). 5. Reverse procedure to reinstall. If gas line has been disconnected, check for gas leaks after reconnection. NOTE: A qualified servicer should disconnect and reconnect the gas supply. The servicer MUST follow installation instructions provided with the gas appliance connector and the warning label attached to the connector. 6. To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the anti-tip bracket. SERVICE-PARTS INFORMATION When your range requires service or replacement parts, contact your dealer or authorized service agency. Please give the complete model and serial numbers of the range which is located on the range model number plate. -10-