Miele K 2601 Vi Operating and Installation instructions - Page 47
Electrical connection, ON/OFF switch.
View all Miele K 2601 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
*INSTALLATION* Installation Electrical connection Risk of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit. Do not use extension cords or ungrounded (two prong) adapters. Do not use a frayed or damaged power cord. Risk of electric shock! For protection against electric shock, this appliance is equipped with a pole-free plug which is protected against reverse polarity. The electrical outlet must be properly grounded. Do not remove the round grounding connector pin from the plug. Use only a grounded plug adapter. Wait for 1 hour after installation before plugging the appliance into the power supply. This allows coolant and refrigerator oil to settle in accordance with regulations. Ensure that the voltage of the power supply corresponds with the connection voltage of the appliance. A power supply of 110-120 V, 60 Hz and 10- 16 Amp, which is protected by a power switch or a fuse, is required to operate the appliance. The manufacturer recommends operating the appliance on a dedicated circuit to avoid overloading the electrical circuit. All relevant legal electrical, fire, and building regulations must be observed when installing the electrical outlet and/ or the appliance. In certain countries, appliances are required to be connected to the electrical supply via a wall-mounted ON/OFF switch. To avoid the risk of fire, electric shock, or other injuries, the appliance must be installed and connected by a suitably qualified electrician in accordance with all relevant local and national regulations and standards, including fire prevention. The socket must not be concealed behind the appliance and must be easily accessible so that the appliance can be quickly disconnected from the electrical supply in case of an emergency. 47