Miele K 2601 Vi Operating and Installation instructions - Page 79
Setting the temperature, Adjusting the temperature in the dry compartment of the MasterFresh zone
View all Miele K 2601 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
The correct temperature Setting the temperature Touch the sensor control to set the temperature. The previously set temperature will appear. Use the and sensor controls to set the temperature. Keeping your finger on the sensor control changes the temperature continuously. Confirm the temperature setting with OK or wait approx. 8 seconds after the last touch of the sensor. This temperature will be automatically adopted. Tip: The new temperature setting can also be confirmed and adopted by closing the appliance door. The temperature display always shows the required temperature. If you have adjusted the temperature, wait for approximately 6 hours if the appliance is not very full and for approximately 24 hours if the appliance is full before checking the temperature display. It will take this long for an accurate reading to be given. If, after this time, the temperature is still too high or too low, adjust it again. Adjusting the temperature in the dry compartment of the MasterFresh zone The temperature in the dry compartment of the MasterFresh zone is maintained at approx. 32°F (0°C). However, if you would like it to be warmer or colder, you can adjust the temperature slightly (see "Selecting additional settings - Adjusting the temperature in the MasterFresh zone (dry compartment) "). Tip: You can select a lower setting for storing, for example, particularly delicate fish. A slightly higher temperature is preferable for storing ready-to-eat food, for example. Temperature range The temperature in the refrigerator section can be set between 36°F (2°C) and 46°F (8°C). The temperature in the dry compartment in the MasterFresh zone can be set between 30°F (-1°C) and 37°F (3°C). 79