NEC C551 User Manual - English - Page 17

English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to reproduce your computer's video signal output. Some display cards may not be able to support the required resolution for proper image reproduction. Your LCD monitor shows proper image by adjusting the factory preset timing signal automatically. Resolution 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 1366 x 768 1400 x 1050 1440 x 900 1600 x 1200 1680 x 1050 1920 x 1080 1920 x 1200 Scanning frequency Horizontal Vertical 31.5 kHz 60 Hz 37.9 kHz 60 Hz 48.4 kHz 60 Hz 45.0 kHz 60 Hz 47.8 kHz 60 Hz 49.7 kHz 60 Hz 60.0 kHz 60 Hz 64 kHz 60 Hz 47.7 kHz 60 Hz 47.7 kHz 60 Hz 65.3 kHz 60 Hz 55.9 kHz 60 Hz 75.0 kHz 60 Hz 65.3 kHz 60 Hz 67.5 kHz 60 Hz 74.6 kHz 60 Hz VGA Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes DisplayPort 1.1a Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Remarks Compressed image Recommended resolution Compressed image Connecting a Player or Computer with HDMI • Please use an HDMI cable with the HDMI logo. • It may take a moment for the signal to appear. • Some display cards or drivers may not display an image correctly. • When you use a computer with HDMI, please set OVER SCAN to "AUTO" or "OFF" (see page 28). • Please check display card when image is compressed with 1920 x 1080. • To output HDMI audio, set [HDMI1], [HDMI2] or [HDMI3] at AUDIO INPUT in the OSD or choose [HDMI1], [HDMI2] or [HDMI3] by the remote control AUDIO INPUT button. • If the monitor's main power is turned on after a connected computer is turned on, sometimes images are not displayed. In this case, please turn off the computer then turn it on again. Connecting a Computer with DisplayPort • Please use a DisplayPort cable with the DisplayPort compliance logo. • It may take a moment for the signal to appear. • When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear. • Select DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock. • To output DisplayPort audio, set [DisplayPort] at AUDIO INPUT in the OSD or choose [DisplayPort] by the remote control AUDIO INPUT button. • If the monitor's main power is turned on after a connected computer is turned on, sometimes images are not displayed. In this case, please turn off the computer then turn it on again. Connecting a USB device USB (2A): USB downstream port (Type-A). To use the Media Player function, please use this port. • Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or cable. • Please refer to the specifications page for power supply information (see page 53, page 54 and page 55). • When you use the USB (2A) port for power supply, please use a USB cable that supports 2A. • Do not bind the USB cable. It may cause heat or fire. English-15