NEC C551 User Manual - English - Page 24

NETWORK & OTHER SETTINGS Below are the options for the Network settings and Shared Folder settings for the Media Player. To select the settings, press the remote control SET/POINT ZOOM button on the NETWORK & OTHER SETTINGS. NETWORK SETTINGS for Media Player Menu IP SETTING IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS DNS PRIMARY DNS SECONDARY Function Set these settings. NETWORK INFORMATION for the Media Player displays what you set in the NETWORK SETTINGS for the Media Player. SHARED FOLDER There are two settings for configuring the SHARED FOLDER. Press the remote control SET/ZOOM button to open the shared settings options. • SHARED SD CARD SETTINGS Folders saved in a computer on the network can be copied to the connected microSD memory card using a web browser on the connected computer. Menu Function ENABLE USER NAME PASSWORD Check the checkbox to enable SHARED SD CARD SETTINGS. USER NAME is displayed. It is the same name as the monitor name and it is not changeable. Set password. Please press OK to activate settings in the SHARED SD CARD SETTINGS. If OK is not pressed, settings that you set are not activated. • SHARED FOLDER SETTINGS. Folders saved in a computer on the network can be copied to the connected microSD memory card by controlling the monitor. Menu ENABLE SHARED FOLDER USER NAME PASSWORD Function Check the checkbox to enable SHARED FOLDER SETTINGS. Set the IP address of the network shared folder location that contains the files for copying to the microSD card. Set USER NAME which is used when connecting the monitor to the shared folder. Set password. Please press OK to activate settings in the SHARED FOLDER SETTINGS. If OK is not pressed, settings that you set are not activated. 1 to 4 shared folders can be set. When the connection to the shared folder fails, an error message is displayed and an "x" is displayed in the folder icon. Carry out the following checks in this case. - Is the name of the destination folder correct? - Is the destination folder set for sharing? - Have access rights been set in the destination folder? - Are there any displayable files saved in the destination folder? SHIFT NO SIGNAL This setting is for a situation when the monitor detects no signal input. If ENABLE is ticked, the monitor goes to no signal status. The monitor detects no signal when the monitor is in the following conditions: - After contents or images are played. - While the monitor is displaying USB window or SD CARD window. Menu Function ENABLE INTERVAL Check the checkbox to enable SHIFT NO SIGNAL. Set the time when the monitor goes into no signal after playing detected items. Please press OK to activate settings in the SHIFT NO SIGNAL. If OK is not pressed, settings that you set are not activated. English-22