NEC C551 User Manual - English - Page 31

English AUDIO VOLUME BALANCE BALANCE SURROUND EQUALIZER TREBLE BASS AUDIO INPUT LINE OUT INTERNAL SPEAKER AUDIO DELAY AUDIO DELAY DELAY TIME RESET SCHEDULE SCHEDULE SETTINGS SETTINGS POWER TIME INPUT PIC. MODE DATE EVERY DAY EVERY WEEK WEEKDAY WEEKEND HOLIDAY SCHEDULE LIST Increase or decrease output volume level. Select STEREO or MONO for the audio output. If you select STEREO, adjust the L/R volume balance. Press the + button to move the stereo sound image to right. Press the - button to move the stereo sound image to left. NOTE: BALANCE is not available if MONO is set at STEREO/MONO. Artificial surround sound. Accentuate or reduce the high frequency range of audio signals. Press the + button to increase TREBLE. Press the - button to decrease TREBLE. Accentuate or reduce the low frequency sound. Press the + button to increase BASS. Press the - button to decrease BASS. Selects the audio input source: [IN1], [IN2], [DisplayPort], [HDMI1], [HDMI2], [HDMI3], [MP]. NOTE: [IN1] and [IN2] are not available if MP is set in INPUT. Selecting VARIABLE enables control of the line out level with the VOLUME button. Selecting OFF enables internal speaker output is turned off. Activate a delay time to output the audio signal. The DELAY TIME can be set between 0 and 100 milliseconds. Set to ON to activate this function. Resets all AUDIO options back to factory settings, except for VOLUME. Creates a working schedule for the monitor. Press the , + - buttons to navigate and change the schedule settings. Press the SET/ZOOM on the remote or Input change buttons on the monitor to select settings. NOTE: Please set DAY & TIME before configuring the SCHEDULE SETTINGS. When the SCHEDULE SETTINGS window is closed, any schedules that you set are saved. If schedules are set for the same time, higher SETTINGS numbers are given the priority. If OFF TIMER is ON, SCHEDULE SETTINGS is not available. When you select an invalid input signal or picture mode, it will display in red. While the SCHEDULE SETTINGS window is open, schedules are not operated. Also, see page 36. Set ON to activate the schedule. Maximum 30 schedules are set. Setting for the monitor power. Please set ON or OFF for each schedule. Set the schedule operation time. If there is no specific time for the schedule set [--]. Set the input signal for the schedule. To keep the input signal that is active when the schedule starts set [--]. When you set INPUT, please select ON at POWER. Set the picture mode for the schedule. To keep the picture mode that is active when the schedule starts set [--]. When you set PIC. MODE, please select ON at POWER. Select one item from below (only one item is available). Select this setting if the schedule is for one day schedule or irregular schedules. Select this setting if the schedule is repeating every day. Select this setting if the schedule is repeating every week. Select this setting if the schedule is on a weekday. This item is set by the WEEKEND and the HOLIDAY settings. A day, which is not selected at WEEKEND and HOLIDAY setting, is set as a weekday. Select this setting if the schedule is on a weekend. Schedule operates on the date that is set at WEEKEND SETTINGS. Schedule operates on the date that is set at HOLIDAY SETTINGS. List of working schedules. Displays up to 30 schedules. English-29