NEC C551 User Manual - English - Page 35
CONTROL, English-33
View all NEC C551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English CONTROL NETWORK INFORMATION LAN IP SETTING IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS DNS PRIMARY DNS SECONDARY CHANGE PASSWORD SECURITY PASSWORD SECURE MODE OFF START-UP LOCK CONTROL LOCK BOTH LOCK IR LOCK SETTINGS MODE SELECT UNLOCK ALL LOCK CUSTOM LOCK Shows the current network settings. NOTE: When changing any LAN settings, you need to wait several seconds until modified LAN settings are applied. Enabling this option automatically assigns an IP address to the monitor from your DHCP server. Disabling this option allows you to enter a fixed IP address and subnet mask data obtained from your network administrator. NOTE: Consult your network administrator for the IP address when AUTO is selected for [IP SETTING]. Set your IP address for the monitor connected to the network when MANUAL is selected for [IP SETTING]. Set your subnet mask data for the monitor connected to the network when MANUAL is selected for [IP SETTING]. Set your default gateway for the monitor connected to the network when MANUAL is selected for [IP SETTING]. NOTE: Enter [0.0.0.0] to delete the setting. Set the IP addresses of DNS servers. AUTO: The DNS server, which is connected with the monitor, will automatically assign its IP address. MANUAL: Manually enter the IP address of the DNS server which is connected with the monitor. Enter the primary DNS server settings of the network connected with the monitor. NOTE: Enter [0.0.0.0] to delete the setting. Enter the secondary DNS server settings of the network connected with the monitor. NOTE: Enter [0.0.0.0] to delete the setting. Allows the security password to be changed. The factory preset password is 0000. Input a security password. The security password is not required when the monitor power is on. The security password is required when the monitor power is on. The security password is required when a remote control button or a control button on the monitor is pressed. The security password is required when either the monitor is powered on, or a remote control button or a control button on the monitor is pressed. Prevents the monitor from being controlled by the wireless remote control. When ACTIVATE is selected, all settings are activated. NOTE: IR LOCK SETTINGS is a function intended only for the wireless remote control buttons. This function does not lock out access to the buttons on the monitor. To return to normal operation, press the "DISPLAY" button on the remote control and hold it down for more than 5 seconds. Selects the mode UNLOCK, ALL LOCK or CUSTOM LOCK. All buttons on the remote control are available for normal operation. Locks all remote control buttons. Selects which buttons to be locked from POWER, VOLUME, and INPUT button. Except for CUSTOM LOCK settings, other buttons on the remote control are locked. POWER: When LOCK is selected, the POWER button is locked. VOLUME: When UNLOCK is selected, set the minimum and maximum volume between VOL.0 to VOL.100. VOLUME (+) button and VOLUME (-) buttons are only available from the minimum volume to the maximum volume you set. When LOCK is selected, VOLUME (+) button and VOLUME (-) buttons are locked. INPUT: When UNLOCK is selected, choose up to three buttons from DisplayPort, HDMI1, HDMI2, HDMI3, VGA (RGB/YPbPr), VIDEO, Media Player which you prefer to be unlocked. The unselected buttons are locked. When LOCK is selected, all INPUT buttons are locked. English-33