NEC C551 User Manual - English - Page 29

English OSD Settings INPUT DisplayPort Select input signal. HDMI1 HDMI2 HDMI3 VGA (RGB/YPbPr) VIDEO MP Displays images or movies saved in microSD memory card or USB storage device. Please refer to the Media Player setting (See page 18). PICTURE PICTURE MODE Select picture mode: [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [CUSTOM1], [CUSTOM2]. See page 25. BRIGHTNESS BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. BRIGHTNESS*1, *4 Adjusts the image brightness in relationship to the background. Press + or - to adjust. GAMMA*1 Select a monitor gamma correction for best picture quality. Selection depends on the desired usage. NATIVE Gamma correction is handled by the LCD panel. 2.2 Typical monitor gamma for use with a computer. 2.4 Good for video (DVD, etc.) COLOR*1 COLOR*2, *4 Except for VGA (RGB) input Adjusts the color depth of the screen. Press + or - to adjust. COLOR TEMPERATURE*2 Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen. A high color temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B levels, set CUSTOM as COLOR TEMP selection. NOTE: Predefined 6500k is set as picture mode, a color temperature of 6500k is predefined so it cannot be changed. COLOR CONTROL*4 Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta. HUE*4 MP, VIDEO inputs only Adjusts the hue of the screen. Press + or - to adjust. CONTRAST*1, *4 Adjusts the image brightness in relationship to the input signal. Press + or - to adjust. SHARPNESS*2, *4 Except for VGA (RGB) input Adjusts the crispness of the image. Press + or - to adjust. ADJUST AUTO SETUP VGA (RGB) input only Automatically adjusts Screen Size, H position, V position, Clock and Phase. AUTO ADJUST VGA (RGB) input only Please use ON normally. When you select OFF, H Position, V Position and Phase are not adjusted automatically when new timing is detected. H POSITION*3 VGA (RGB), VGA (YPbPr) inputs only Controls the horizontal position of the image within the Display area of the LCD. Press + to move right. Press - to move left. V POSITION*3 VGA (RGB), VGA (YPbPr) inputs only Controls the vertical position of the image within the Display area of the LCD. Press + to move up. Press - to move down. CLOCK VGA (RGB) input only Press + to expand the width of the image on the right of the screen. Press - to narrow the width of the image on the left. PHASE VGA (RGB) input only Adjusts the visual "noise" on the image. *1: This function is not available when sRGB is selected at PICTURE MODE. *2: This function is not available in HDMI/DisplayPort MODE when RGB is selected or when AUTO is selected and the input signal is RGB. *3: This function is not available when 1:1 is selected as ASPECT. *4: This function is not available for still image by MP input. English-27