NEC LT280 LT280/LT38 UM - Page 78
[Entry Edit Command], Source Name, Input Terminal
UPC - 050927250569
View all NEC LT280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
[Entry Edit Command] 6. Using On-Screen Menu You can edit signals on the [Entry List]. Load Enables you to select a signal from the list. Store Enables you to store the currently projected signal. Cut Enables you to remove a selected signal from the list and place it on the "clipboard" in the projector. Copy Enables you to copy a selected signal from the list and place it on the "clipboard" in the projector. Paste Enables you to paste the signal placed on the "clipboard" to any other line of the list. Edit Enables you to change source names. Source Name: Enter a signal name. Up to 18 alphanumeric characters can be used. Input Terminal: Change the input terminal. Lock: Set so that the selected signal cannot be deleted when "All Delete" is executed. After executing [Lock], the changes cannot be saved. Skip: Set so that the selected signal will be skipped during auto search. When complete, select OK and press ENTER. To exit without storing the setting, select Cancel. Select [Source Name] and press ENTER to display the Source Name Edit window. You can change source name on this window. Press ̄ to display the software keyboard, which you can enter alphanumeric characters. See page 117 for the key function of the software keyboard. All Delete This feature enables you to delete all the registered signals in the Entry List. The following buttons are not available for the currently projecting signals: 1) The Cut and Paste buttons on the [Entry Edit Command] screen 2) The Input Terminal button on the [Entry Edit] screen NOTE: When all the signals in the [Entry List] are deleted, the currently projected signal will be also deleted except locked signals. 68