NEC LT280 LT280/LT38 UM - Page 99
Advanced] menu, Network Type] required for wireless only, SSID Network name
UPC - 050927250569
View all NEC LT280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
[Advanced] menu [Network Type] (required for wireless only) 6. Using On-Screen Menu Site Survey: Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access. To select an SSID, highlight [SSID] and use the SELECT ̈ to select [OK] and press the ENTER button. : access point : Ad Hoc PC : WEP enabled NOTE: You cannot connect to a device with the SSID for Channel 14 because it is not displayed in the list. SSID (Network name): Enter an identifier (SSID) for wireless LAN when selecting [Infrastructure] or [802.11 Ad Hoc] in [Mode]. Communication can be done only with equipment whose SSID matches SSID for your wireless LAN. Up to 32 alphanumeric characters can be used. NOTE: To disable SSID, select a space (null) or [ANY] (All caps). Mode: Select communication method when using wireless LAN. Infrastructure ........ Select this option when communicating with one or more equipment connected to the wireless or wired LAN network via an access point. 802.11 Ad Hoc ...... Select this option when using the wireless LAN to directly communicate with a computer in peer-to-peer mode. This is a method that meets the IEEE802.11 wireless standard. NOTE: When in Ad Hoc mode, only 802.11b is available for communication method. Data transmission speed in Ad Hoc mode is limited up to 11Mbps. Channel: Select a channel. There are 14 options available. 89