NEC LT280 LT280/LT38 UM - Page 84
Selecting Aspect Ratio [Aspect Ratio], NOTE: During 3D Reform adjustment
UPC - 050927250569
View all NEC LT280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Selecting Aspect Ratio [Aspect Ratio] Screen Type 4:3 Screen Type 16:9 6. Using On-Screen Menu Aspect Ratio allows you to select the best Aspect mode to display your source image. When screen type 4:3 is selected for the source, the following selections will display: 4:3 Standard 4:3 aspect Letter Box Reduced to display the true aspect with black borders on top and bottom Wide Screen .......... Left & Right stretched with black borders on top and bottom Crop Left & Right stretched. Left & Right sides cut. Available for 4:3 only. When screen type 16:9 is selected for the source, the following selections will display: 4:3 Window Reduced to display the true aspect with black borders on right and left Letter Box Standard 16:9 aspect Wide Screen .......... Left and right stretched to display the true aspect 4:3 Fill Stretched to display in 16:9 aspect ratio NOTE: You can adjust image position vertically for a source with black borders on top and bottom. (→ page 85) NOTE: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with a [Aspect Ratio] or [Screen] setting may raise concern about the infringement of copyrights which are protected by copyright law. NOTE: During 3D Reform adjustment, [Aspect Ratio] may not be available. Should this happen, first reset the 3D Reform data and then do setting again. Second repeat the 3D Reform adjustment. Changing the aspect ratio can limit 3D Reform in its adjustable range. Input Signal Screen Type 4:3 Letterbox Squeeze 4:3 Screen 4:3 16:9 Screen 4:3 Window 4:3 Fill Letterbox Letterbox Wide Screen Crop Wide Screen 74