NEC UN552S External Controls - Page 19
Commands, 5.1 Save Current Settings.
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5.5 Commands "Command message format" depends on each command. Some commands are shown with usage. Refer to section 7 to 25. 5.5.1 Save Current Settings. The controller requests for the monitor to store the adjusted value. Command code STX ETX '0' 'C' Send "OC"(30h, 43h) as Save current settings command. Complete "Save Current setting" command packet as follows; ASCII: 01h-30h-41h-30h-41h-30h-34h-02h-30h-43h-03h-CHK-0Dh SOH-'0'-'A'-'0'-'A'-'0'-'4'-STX-'0'-'C'-ETX-CHK- CR The monitor replies the packet for confirmation as follows; SOH-'0'-'0'-'A'-'B'-'0'-'6'-STX-'0'-'0'-'0'-'C'-ETX-CHK- CR (19/145)
(19/145)
5.5 Commands
"Command message format" depends on each command. Some commands are shown with usage. Refer to
section 7 to 25.
5.5.1 Save Current Settings.
The controller requests for the monitor to store the adjusted value.
Send "OC"(30h, 43h) as Save current settings command.
Complete "Save Current setting" command packet as follows;
ASCII: 01h-30h-41h-30h-41h-30h-34h-02h-30h-43h-03h-CHK-0Dh
SOH-'0'-'A'-'0'-'A'-'0'-'4'-STX-'0'-'C'-ETX-CHK- CR
The monitor replies the packet for confirmation as follows;
SOH-'0'-'0'-'A'-'B'-'0'-'6'-STX-'0'-'0'-'0'-'C'-ETX-CHK- CR
STX
Command code
ETX
'0'
'C'