NEC X981UHD External Control Codes - Page 25
Step 5. Request the monitor to store the Backlight setting. Save Current Settings Command
View all NEC X981UHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Ø Repeat Step 1 and Step 2, if you need to check the Backlight setting. (Recommended) Step 5. Request the monitor to store the Backlight setting. (Save Current Settings Command) Header SOH-'0'-Monitor ID- '0'-'A'-'0'-'4' Message STX-'0-'C'-ETX Check code Delimiter BCC CR Header SOH (01h): Start of Header '0' (30h): Reserved Monitor ID: Specify the Monitor ID which you want to store the setting. Ex.) If Monitor ID is '1', specify 'A'. '0' (30h): Message sender is the controller. 'A' (41h): Message type is "Command". '0'-'4' (30h, 34h): Message length is 4 bytes. Message STX (02h): Start of Message '0'-'C' (30h, 43h): Command code is 0Ch as "Save current settings". ETX (03h): End of Message Check code BCC: Block Check Code Refer to the section 4.3 "Check code" for a BCC calculation. Delimiter CR (0Dh): End of packet (25/130)