NEC X981UHD External Control Codes - Page 85
Daylight Saving Write
View all NEC X981UHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
15.2 Daylight Saving Write This command is used in order to write the setting of the Daylight Saving. 1) The controller requests the monitor to write Daylight Saving. Header SOH-'0'-Monitor ID'0'-'A'-'1'-'E' Message STX-'C'-'A'-'0'-'1'-'0'-'1'-BM-BD1-BD2BT1-BT2-EM-ED1-ED2-ET1-ET2-TD-ETX Check code BCC Delimiter CR Header SOH (01h): Start of Header '0' (30h): Reserved Monitor ID: Specify the Monitor ID of which you want to change a setting. Ex.) If Monitor ID is '1', specify 'A'. '0' (30h): Message sender is the controller. 'A' (41h): Message type is "Command". '1'-'E'(31h, 45h): Message length (30bytes) Message STX (02h): Start of Message 'C'-'A'-'0'-'1' (43h, 41h, 30h, 31h): Daylight Saving Setting Command '0'-'1' (30h, 31h): Write BM: BEGIN MONTH JANUARY - DECEMBER: 01h (30h, 31h) - 12h (31h, 32h) BD1: BEGIN DAY1 FIRST : 01h (30h, 31h) SECOND : 02h (30h, 32h) THIRD : 03h (30h, 33h) FOUR : 04h (30h, 34h) LAST : 05h (30h, 35h) BD2: BEGIN DAY2 (Day of the week) SUNDAY : 01h (30h, 31h) MONDAY : 02h (30h, 32h) TUESDAY : 03h (30h, 33h) WEDNESDAY : 04h (30h, 34h) THURSDAY : 05h (30h, 35h) FRIDAY : 06h (30h, 36h) SATURDAY : 07h (30h, 37h) BT1: BEGIN TIME1 (Hour) 00h (30h, 30h) - 23 (32h, 33h) BT2: BEGIN TIME2 (Minute) 00h (30h, 30h) - 59 (35h, 39h) EM: END MONTH JANUARY - DECEMBER: 01h (30h, 31h) - 12h (31h, 32h) ED1: END DAY1 FIRST : 01h (30h, 31h) SECOND : 02h (30h, 32h) THIRD : 03h (30h, 33h) FOUR : 04h (30h, 34h) LAST : 05h (30h, 35h) ED2: END DAY2 (Day of the week) SUNDAY : 01h (30h, 31h) MONDAY : 02h (30h, 32h) TUESDAY : 03h (30h, 33h) WEDNESDAY : 04h (30h, 34h) THURSDAY : 05h (30h, 35h) FRIDAY : 06h (30h, 36h) SATURDAY : 07h (30h, 37h) ET1: END TIME1 (Hour) 00h (30h, 30h) - 23 (32h, 33h) ET2: END TIME2 (Minute) 00h (30h, 30h) - 59 (35h, 39h) TD: TIME DIFFERENCE (85/130)