Netgear D6400 User Manual - Page 123
Enable and Manage Network Access Control, To set up network access control, admin, password
![]() |
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
AC1600 WiFi VDSL/ADSL Modem Router Model D6400 Enable and Manage Network Access Control When you enable access control, you must select whether new devices are allowed to access the network or blocked from accessing the network. By default, currently connected devices are allowed to access the network, but you can also block these devices from accessing the network. To set up network access control: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. Type http://www.routerlogin.net. A login screen displays. 3. Enter the user name and password for the modem router. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays. 5. Select ADVANCED > Security > Access Control. 6. Select the Turn on Access Control check box. You must select this check box before you can specify an access rule and use the Allow and Block buttons. When this check box is cleared, all devices are allowed to connect, even if the device is in the list of blocked devices. 7. Click the Apply button. Your settings are saved. Control Access to the Internet 123
![](/manual_guide/products/netgear-d6400-user-manual-f7b9157/123.png)